If your hand pump loses pressure while you are using it or your vacuum gauge is moving over the place it is probably because the connecting tube is worn out. Putting in a deluxe pump replacement hose will make the seal tight again keep the gauge readings steady and get your vacuum system working at full pressure right away.
What Is a Deluxe Pump Replacement Hose?
A deluxe pump replacement hose is a clear tube that is 3/16 inches inside. It is made for hand pumps that you use by hand. Have a gauge to measure pressure. This tube connects the handle of the hand pump to the part that attaches to the cylinder making sure that air does not leak out while it is being used.
Why You Need a Deluxe Pump Replacement Hose
You need a deluxe pump replacement hose because the tubes that connect things can get damaged easily when you use them a lot. Over time the heat, the pressure of the suction and bending the tube back and forth can make it weak. If you use a tube that is worn out you will have three problems:
- Inaccurate Gauge Readings: The gauge will not give you the readings because tiny cracks in the old tube will let a little air in. The gauge will say you are losing pressure even if the seal on the cylinder is fine.
- Loose Barb Connections: The part where the tube connects to the barb will come loose because the material gets old and is not flexible anymore. This will make air leak out all the time.
- Kinking & Blocked Airflow: The tube will get kinked. Block the airflow because it gets soft and flat. This will stop the pump from pulling the air out like it should.
Product Details
Here are the details about the product:
| Property | Details |
| Inside Diameter | The inside of the tube is 3/16 inches. |
| Material | It is made of flexible clear PVC. |
| Pricing | It costs $3.00 per foot. You can get it in the length you need. |
| Pump Type | It is used for hand pumps that have a gauge to measure pressure. |
| Compatibility | It works with L.A. Pump hand pumps and the standard 3/16 inch barbs. |
| Warranty | It has a one-year warranty from Apex Pumping. |
How to Choose the Length for Your Setup
To choose the length for your setup you can get the tube by the foot. This way you can make your setup the way you need it to be.
- If you plan to hold the hand pump close to the cylinder while you are sitting down you should get a two-foot tube.
- If you want to put the pump handle down on a table or chair without pulling on the cylinder you should get a three or four-foot tube.
When you order just choose the quantity based on how feet you need. For example if you choose three you will get one piece of tube that’s three feet long.
How to Replace the Tube
Replacing the tube is easy. Only takes a couple of minutes. You do not need any tools.
- Take the tube off the barb on the hand pump and the stem on the male coupler. If it gets stuck you can cut the end of the tube with a knife.
- Make the end of the tube soft by putting it in warm water for a few seconds. This will make it slide onto the barbs easily.
- Push the tube onto the barbs on the pump handle and the male coupler until it is all the way on.
- Test it to make sure it does not leak by blocking the end of the coupler with your thumb and pulling the pump a few times. The gauge should stay steady.
Maintenance and Care
To keep your deluxe pump replacement hose in condition you should:
- Wash it with warm water and mild soap after you use it.
- Do not use chemicals like rubbing alcohol or acetone because they can damage the PVC.
- Hang it up to dry so water can drain out.
- Store it in coils so it does not get kinked.
Frequently Asked Questions
People often ask:
What size is a pump replacement hose?
It is 3/16 inches inside.
Can I use this hose on a pump?
No electric pumps need a hose.
Why is my new hose leaking?
It is probably because the hose is not, on the barb enough or the barb is dirty. Clean the barb. Push the hose on all the way.
How do I cut the hose to a length?
You can use scissors or a razor blade to cut it across.
Get Your Deluxe Pump Replacement Hose Today
Get a deluxe pump replacement hose today and fix your vacuum system. Do not let a leaky hose ruin your setup or give you readings. Upgrade to a reliable hose and get good suction every time.